The Variety Of Industrial Pallet Racking System You Can Choose From

Posted on: 13 May 2015


Are you interested in a pallet racking system, but are not sure which one to choose? Then make sure to invest some time in learning more about the different type of pallet racking systems out there. By doing so you'll be able figure out which industrial pallet racking system meets your requirements. Below are some of the common types of pallet racking systems available:

Floor Stacking

This type of industrial pallet racking system is the most basic one available: the pallets are organized in rows on the floor. The length of the rows can be as deep as the equipment that retrieves them allows them to be. Stacking of the pallet is possible, but only if the pallet underneath can support the load – that will depend on the type of items that are stacked. This type of system is also known as a last in, last out system.

The advantages of this type of industrial pallet racking are that you will not need to invest in specialized equipment, and the packing density is relatively high. On the downside, there will be a lack of accessibility for some pallets, and the surface area of the floor space occupied is high.

Drive In, And Drive Through Racking System

This type of industrial pallet racking system allows a fork truck to drive into a bay where the pallets are unloaded on side racks. The upright structure where the pallets are housed will be tied together at the top in order to increase the structural integrity of the structure. For a smooth flow, the bay will have one entry point where fork lift trucks can enter, and another one where they leave.

Because the racking system is built upwards, very little floor space is occupied when compared with the floor stacking system.

Selective Pallet Racking Systems

On a selective pallet racking system, shelves are constructed from uprights and cross-beams. For every bay there is the potential for a large volume of pallets to be stored – but only if your storage facility has high ceilings.

The advantages of such a system are that you get to have access to every single pallet as long as the depth is at one pallet. When there is a depth of two, you will need to remove one in order to reach the other. However, there is a need for aisles between the different rows – therefore the overall storage density is low. For more information about pallet racks, visit Certified Handling Systems.